*rohs directive 2002/95/ec jan 27 2003, including annex specifications are subject to change without notice. customers should verify actual device performance in their specific applications. chf2010xnp series 10 w power rf chip termination/resistor features dc to 2.2 ghz terminals for pcb placement low vswr aluminum nitride ceramic high power rohs compliant* applications rf amplifiers attenuators antenna feeds wilkinson dividers general specifications substrate...........................................aln resistive film ..........................thick-film terminals ..........................nisn and niau capacitance.................................0.75 pf resistance chf2010cnp500l ........................50 ? chf2010cnp101r......................100 ? chf2010dnp101r......................100 ? tolerance chf2010cnp500l .......................? % chf2010cnp101r.......................? % chf2010dnp101r.......................? % packaging tape & reel.............2000 pcs./10 ?reel bulk ..................................100 pcs./bag absolute ratings power...............................................10 w frequency chf2010cnp500l......................2 ghz chf2010cnp101r ..................2.2 ghz chf2010dnp101r ..................2.2 ghz vswr .................................1.2 maximum power (watts) heat sink temperature ( c) 12 10 8 6 4 2 0 -55 0 100 150 characteristic curve product dimensions 1.2 (0.047) 1.2 (0.047) millimeters (inches) dimensions = 0.3 (0.012) tolerance = 5.3 (0.208) 5.3 (0.208) 5.3 (0.208) 5.3 (0.208) 0.58 (.02) 0.58 (.02) 0.76 (.03) 0.58 (.02) 0.76 (.03) 2.4 (.09) 2.7 (0.106) 2.7 (0.106) 2.3 (0.9) reliable electronic solutions asia-pacific: tel: +886-2 2562-4117 fax: +886-2 2562-4116 europe: tel: +41-41 768 5555 fax: +41-41 768 5510 the americas: tel: +1-951 781-5500 fax: +1-951 781-5700 www.bourns.com *rohs compliant chf2010cnp500l chf2010cnp101r & chf2010dnp101r
specifications are subject to change without notice. customers should verify actual device performance in their specific applications. chf2010xnp series 10 w power rf chip termination/resistor packaging dimensions 2.0 (.080) 20.5 (.807) 13.0 0.5 (.512 .020) 1.0 0.2 (.040 .008) 12.5 0.2 (0.5 .008) 4.0 0.1 (.157 .004) 1.75 0.1 (.050 .004) 63.0 0.2 (2.5 .008) 254.0 0.2 (10.0 .008) 12.0 0.2 (.47 .008) 5.5 0.05 (0.22 .002) 5.6 0.1 (.221 .004) 2.0 0.05 (.08 .002) 4.0 0.1 (.157 .004) maximum camber: 1.5 +0.1/-0 (.056 +.004/-0) 1.0 (.040) cumulative tolerance over 10 holes: 0.2 (.008) 8.0 0.1 (.315 .004) mm (inches) dimensions: rev. 01/08 how to order chf 2010 c n p 500 l x e model package version c = 5 % tolerance d = 2 % tolerance substrate mount p = printed circuit board resistance code 500 = 50 ohm 101 = 100 ohm type l = termination (one lead) r = resistor (two leads) plating w = nisn x = ni au packaging blank = bulk (100 pcs./bag) e = tape & reel (2,000 pcs./10 ?reel)
|
